The Effect of Denture Base Repair with Special Type of Acrylic O-Cry1 and Different Surface Treatments on Impact Bond Strength of Acrylic Resin (Comparative Study)

Alaa Ezat Abdulalmajeed

Abstract


Background: the common problem in prosthodontics is a fracture of the denture base and it represents an annoyance for the dentists. Therefore, the option of increasing repair strength using new reinforcement materials is of great interest to prosthodon- tists. The purpose of this study was to assess the effects of using a special type of acrylic o-cry1 in repair instead of heat cure acrylic resins and different surface treatments on impact bond strength using Ivomet and conventional curing methods.

Materials and Methods: One hundred thirty specimens of heat acrylic resins were constructed. There are 2 main groups accord- ing to curing methods (Ivomet and conventional method curing). For each group, there were 6 groups according to the surface treatments used (untreated, monomer, thiner, zirconium oxide, glass fiber and butt joint with monomer) as well as control group. Results: The study showed that the control group had a higher value of impact strength than other groups which were cured by conventional method. For Ivomet curing, the butt joint with monomer and glass fiber groups improved the impact bond strength in comparison to other groups.

Conclusion: the butt joint with monomer treatment and glass fiber groups have improved the impact strength of the repaired acrylic resins when using Ivomet compared with other groups. On the other hand, the use of thiner and zirconium oxide reduced the impact bond strength when using the conventional curing method. The use of Ivomet device in curing samples improved the impact strength of acrylic repaired with O-cry1. 


Full Text:

PDF

References


Sarac SY., Sarac D., kulunk T., and Kulunk S. The effect of chemical surface treatments of different denture base resins on the shear bond strength of denture repair .J.Prosth. Dent.2005;94)3(:259-266.

Raszewski Z, Nowakowska D. Mechanical properties of hot curing acrylic resin after reinforced with different kinds of fibers. Int J Biomed Mat Res. 2013;1:9–13.

Seó RS, Neppelenbroek KH, Filho JN. Factors affecting the strength of denture repairs. JProsthodont. 2007;16)4(:302- 10.

Naveen S Yadav , Shilpi Khare , Sunil Kumar Mishra , Rajesh Vyas, Harsh Mahajan , Rajkiran Chitumalla, Evaluation of Transverse Strength of Repaired Heat Cured Denture Base Resins without Surface Treatment and with Chemical and Mechanical Surface Treatment, Journal of International Oral Health 2015; 7)8(:89-92.

Arioli Filho J. N., L. E. Butignon, R. D. P. Pereira, M. G. Lucas, and F. D. A. Mollo Jr., “Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energyand chemical polymerization,” Journal of Applied Oral Science.2011; 19) 3(: pp. 249–253.

Suvarna S., T. Chhabra, D. Raghav, D. Singh, P. Kumar, and S. Sahoo, “Residual monomer content of repair autopolymerizing resin after microwave postpolymerization treatment,” European Journal of Prosthodontics.2014; 2) 1(: pp. 28–32.

Stoia A.E., Sinescu C., Pielmusi M. ,Enescu M., Tudor A. , Rominu R.O. and Rominu M.” Tensile testing ,a method used to demonstrate the effect of organic solvents on acrylic teeth denture base resin bond strength” Int. J. Bio and Biom. Eng. 2011;1)5(: 9-17.

Ibrahim, Evaluation of Fatigue and Impacted bond Strengths of Denture Base Repaired by Using Different Type of Surface Treatment, Tikrit Journal for Dental Sciences 1)2015(,p: 16-18.

Asar N. V., H. Albayrak, T. Korkmaz, and I. Turkyilmaz, “Influence of various metal oxides on mechanical and physical properties of heat-cured polymethylmethacrylate denture base resins,” Journal of Advanced Prosthodontics, vol. 5, no. 3, pp. 241– 247, 2013.

Alhareb A. O. and Z. A. Ahmad, “Effect of Al2O3/ ZrO2 reinforcement on the mechanical properties of PMMA denture base,” Journal of Reinforced Plastics and Composites, vol. 30, no. 1, pp. 86–93, 2011

Areej and mohammed., ‘’the effect of zirconium oxide nano fillers addition of the transverse strength & reinforcement of repaired acrylic resin’’., 2016 p:40-45.

Polyzois G.L.; Tarantili P.A.; Frangou M.J. and Anderopoulos A.G. )2001(.”Fracture force, deflection at fracture ,and toughness of repaired denture resin subjected to microwave polymerization or reinforced with wire or glass fiber “; J.Prosthet .Dent. ;86)6(:613-619.

Stipho H. D., “Repair of acrylic resin denture base reinforced with glass fiber,” The Journal of Prosthetic Dentistry, vol. 80, no. 5, pp. 546–550, 1998.

Nagai E., Otani K., Satoh Y. ,and Suzuki S.)2001(.” Repair of denture base resin using woven metal and glass fiber : effect of methylene chloride pretreatment “ J. Prosthet. Dent; 85:496-500

ISO 179-1:2000: Plastics Determination of Charpy impact properties Part 1: Non-instrumented impact test.

Barbosa D.B., Monteiro D.R., Barao V.R., Pero A.C., and Compagnoni M.A.)2008(. “Effect of monomer treatment and polymerization methods on the bond strength of resin teeth to denture base material”.; Gerodontology ;26:225- 226

ADA )1999(:American national standers institute/ American dental association specification No.12 for denture base polymer . 10th Ed. ;Chicago :council on dental material and devices

Polyzois G.L.; Tarantili P.A.; Frangou M.J. and Anderopoulos A.G. )2001(.”Fracture force, deflection at fracture ,and toughness of repaired denture resin subjected to microwave polymerization or reinforced with wire or glass fiber “; J.Prosthet .Dent. ;86)6(:613-619.

Abdul-Hadi N.F.)2007(:"The effect of fiber reinforced and surface treatment on some of the mechanical properties of the repaired acrylic denture base materials )A comparative study) M.Sc. Thesis , College of Dentistry , University of Baghdad.

Hanna E.A. ;Shah.F.K. and Gabreel A.A.)2010(."Effect

of joint surface . contours on the transverse and impact strength of denture base resin repaired by various methods .An in vitro study".6 )9(:115-125.

Intisar J., 2015., ‘’An Evaluation of Some Mechanical Properties of Autopolymerizing Acrylic Resin with the Modified One after Changing the Curing Environment’’: )In vitro Study(, J. Bagh. College Dentistry.

AL-Shammari F .“Transverse strength measurements of repaired acrylic resin modified with different surface treatments‘‘,college of health and medical technology/ Baghdad.2014;P:41-44.

Naveen S Yadav , Shilpi Khare , Sunil Kumar Mishra , Rajesh Vyas, Harsh Mahajan , Rajkiran Chitumalla, Evaluation of Transverse Strength of Repaired Heat Cured Denture Base Resins without Surface Treatment and with Chemical and Mechanical Surface Treatment, Journal of International Oral Health 2015; 7)8(:89-92.

Siddesh CS, Aras MA. In vitro evaluation of transverse strength of repaired heat cured denture base resins with and without surface chemical treatment. JIndian Prosthodont Soc 2008;8)2(:87-93.

Seo R. S., K. H. Neppelenbroek, and J. N. A. Filho, “Factors ́ affecting the strength of denture repairs: topics of interest,” Journal of Prosthodontics, vol. 16, no. 4, pp. 302–310, 2007.

Rached RN. , Del Bel Cury AA.)2001(."Heat cured acrylic resin repaired with microwave – cured one " J. Oral Rehabil; 28 : 370-375.

Grajower R. and Goultschin J. )1984(.” The transverse strength of acrylic resin strips and of repaired acrylic samples “ J. Oral Rehabil.;)11(:237-247.

Jagger, R.G., Jagger, S.M. Allen and A. Harrison, 2002, An investigation into the transvers and impact strength of high strength denture base acrylic resins, J. oral rehabil. 29, PP: 263-267, full text via cross ref |View record in scpus| cited by in scopus )7(.

D.Jagger D., A. Harrison, R. Gagger and P. Miward, 2003, The Effect of Addition of Poly methyl. Methacrylate)methy1 mthacrylat fibers on some properties of high strength heatcured acrylic resin denture base material, Journal of oral rehabilitation 30:3, 231-235.

Mohammed M., Ahmed , Ahmad M. and Aws S. , 2016.’’ Influence of incorporation of ZrO2 nanoparticles on the repair strength of polymethyl methacrylate denture bases’’International Journal of Nanomedicine.

Areej shihab A., the effect of fiber reinforcement on the tensile strength of repair acrylic resin cured by two different methods, the collegeof health and medical technology , 2011, p. 50-51.

Ali E.K. )2005(: effect of fiber reinforcement on some properties The of repaired acrylic resin with different joint shape preparation, M.Sc. Thesis, College of dentistry, University of Baghdad, Iraq.

Polyzois G.L.; Tarantili P.A.; Frangou M.J. and Anderopoulos A.G. )2001(.”Fracture force, deflection at fracture ,and toughness of repaired denture resin subjected to microwave polymerization or reinforced with wire or glass fiber “; J.Prosthet .Dent. ;86)6(:613-619.

Nagai E., Otani K., Satoh Y. ,and Suzuki S.)2001(.” Repair of denture base resin using woven metal and glass fiber : effect of methylene chloride pretreatment “ J. Prosthet. Dent; 85:496-500

George R, D’Souza M. Surface chemical treatment with ethylacetate and repair of fractured denture base resins: An in-vitro analysis of transverse strengths. J Indian Prosthodont Soc 2001;1:41-4.

Siddesh CS, Aras MA. In vitro evaluation of transverse strength of repaired heat cured denture base resins with and without surface chemical treatment. JIndian Prosthodont Soc 2008;8)2(:87-93.

Golbidi F, Mousavi T. Transverse strength of repaired denture base material with wire and two auto polymerized acrylic resin. Journal of Dentistry, Tehran University of Medical Sciences, Tehran, Iran.2007.4)4(:183-187




DOI: http://dx.doi.org/10.26477/idj.v39i3.131

Refbacks

  • There are currently no refbacks.




--------------------------------------------------------------------------------------------

Copyright by Iraqi Dental Journal

ISSN (Print): 2307-4779 | ISSN (Online): 2411-9741