|
Issue |
Title |
|
Vol 43, No 2 (2021) |
Determination of Surface Hardness of Refractory Cast Investment Materials Before and After Dipping in Wax Hardening Agents |
Abstract
Remote
|
Zahraa Noori yassan, Israa Mohammed Hummudi |
|
Vol 43, No 2 (2021) |
Determination of Surface Hardness of Refractory Cast Investment Materials Before and After Dipping in Wax Hardening Agents |
Abstract
PDF
|
Zahraa Noori yassan, Israa Mohammed Hummudi |
|
Vol 41, No 1 (2019) |
Evaluation the Effect of Fibers Addition on Mechanical Properties of Flexible Acrylic Resin |
Abstract
pdf
|
Zaid Ezzat Abdul-Majeed, Israa Mohammed Hummudi |
|
Vol 37, No 3 (2015) |
Evaluation of Bond Strength of Surface Conditioned Artificial Teeth with Modified and Valplast Denture Bases With Aging |
Abstract
PDF
|
Hikmat J Aljudy, Ali N Ahmad, Ihab N AlSafi |
|
Vol 37, No 3 (2015) |
Studying the properties of heat cure acrylic resin after reinforced with polyamide fibers treated with plasma (oxygen gas) |
Abstract
PDF
|
Raghdaa. K. Jassim |
|
Vol 37, No 3 (2015) |
Comparison of Some Mechanical Properties of Silanated SiO2 and Polyester Fiber Composite Incorporation into Heat Cured Acrylic Resin. |
Abstract
PDF
|
Abdalbasit A Fatihallah |
|
Vol 37, No 2 (2015) |
Evaluation of Adding Ginger Oil on Sorption and Solubility of Soft Liners Using Different Saliva PH Levels |
Abstract
PDF
|
Hawraa Khalid Aziz |
|
Vol 37, No 2 (2015) |
Comparison Between Flapped and Flapless Implant Techniques by Measuring Crestal Bone Level: A Prospective Radiographical Trial |
Abstract
PDF
|
Ali J. Abdul-Saheb, Resha J. Abdul-Saheb, Abdalbasit A Fatihallah |
|
Vol 37, No 2 (2015) |
Influence of Different Concentrations of Fluoride on The Porosity of Acrylic Resin Denture Base Materials |
Abstract
PDF
|
Amal Abdul-Latif Rashid |
|
Vol 37, No 1 (2015) |
Denture Cleanser’s Effect on Impact Strength of Heat Cured Acrylic |
Abstract
PDF
|
Areeg Shehab Ahmad |
|
Vol 37, No 1 (2015) |
Assessment of The Satisfaction Tendency Toward Different Prosthodontic Treatments’ Modalities |
Abstract
PDF
|
Monia MN Kandil |
|
Vol 37, No 1 (2015) |
Strength and Surface Roughness of Cross Linking Acrylic Resin Processed by Different Heat Curing Methods |
Abstract
PDF
|
Ali Ehsan Kareem |
|
Vol 37, No 1 (2015) |
Evaluation Amount of Residual Monomer in Two Types of Denture Base Materials Heat and Light Cure Acrylic Reinforced with Silainated Glass Fiber |
Abstract
PDF
|
Raghdaa K. Jassim, Aseel A. A. Radhi |
|
Vol 37, No 1 (2015) |
Surface Roughness of Dental Porcelain Fused-To-Nickel Chromium Using Different Polishing Materials and Glazing Techniques |
Abstract
PDF
|
Lateef Essa Alwan Al-Jourani, Sabah Sahib Al-Habeeb, Ola Mohammed Abdullah |
|
Vol 36, No 3 (2014) |
Prevalence of Prosthodontic Appliances Replacement in Erbil City |
Abstract
|
Ghalib Rahman Hawrami |
|
Vol 36, No 3 (2014) |
Determination of Acrylic Denture Resin Surface Roughness by Different Processing Techniques |
Abstract
|
Akhlas Zeid Abood |
|
Vol 36, No 2 (2014) |
Evaluation of SBS between Artificial Teeth and Denture Base after Different Surface Treatment |
Abstract
|
Mudher Abdulmunem Abduljabbar, Nihad Hasan Mohammed, Yasameen Ibrahim Mahbas |
|
Vol 36, No 1 (2014) |
Resin-Bonded Fixed Partial Dentures: from Metal-Ceramic to Zirconia What Concerns? |
Abstract
PDF
|
Zohra Nouira, I. N. Gasmi, D. Hadyaoui, J Saafi |
|
Vol 36, No 1 (2014) |
Surveying of Local Factors in Edentulous Iraqi Population |
Abstract
PDF
|
Abbas F Al-Rahmani |
|
Vol 43, No 1 (2021) |
Piezographie in the service of edentulous: clinical case report |
Abstract
PDF
|
AlaEddine Mahfoudhi, Oumaima Tayari, Amani Mizouri, Jamila Jaouadi |
|
1 - 20 of 20 Items |
|